IEC 61089 / ASTM B232  ·  Overhead Conductor & ABC Cable Manufacturer
ZMS Cable logo
Product family

ACSR Conductors

The workhorse of overhead transmission: aluminium strands over a galvanised steel core, combining high conductivity with the tensile strength long spans demand.

Home / Products / ACSR Conductors
ACSR conductor with galvanised steel core
6/1 – 54/7Stranding options
Range overview

ACSR aluminum conductor steel reinforced

ACSR conductor pairs hard-drawn aluminium wires with a galvanised steel core. The aluminium carries the current; the steel carries the mechanical load. ZMS strands ACSR to BS 215 Part 2, ASTM B232 and IEC 61089, in sections from 25 mm² to 1000 mm² and above.

Section range25–1000 mm²
Stranding6/1, 26/7, 30/7, 54/7 and more
Key standardsBS 215-2 / ASTM B232 / IEC 61089
CustomisationGrease fill / special ratios
Technical data

ACSR conductor specification

ConductorHard-drawn aluminium over galvanised steel core
Section range25–1000 mm² (larger on request)
Stranding6/1, 6/7, 26/7, 30/7, 45/7, 54/7 wire configurations
Steel core coatingClass A zinc galvanising (Class B/C on request)
Corrosion protectionGrease filling of core or complete conductor optional
StandardsBS 215 Part 2, ASTM B232, IEC 61089, DIN 48204
Common code namesGopher 25, Weasel 30, Ferret 40, Rabbit 50, Horse 70, Dog 100, Wolf 150 mm²
PackingWooden or steel drums, 1000–3000 m standard lengths

Typical construction data. Final values are confirmed on the order-specific datasheet.

Customisation

We can adapt this family to the project requirements. Common options include:

  • Non-standard aluminium/steel ratios
  • Grease-filled core for coastal routes
  • Compacted or shaped strands
  • Special drum lengths and markings
  • Type test reports for tender files
Send Your Specification
Applications

Where ACSR conductor is specified

The right stranding depends on span length, tension limits and the corrosion environment.

Transmission lines

HV and EHV lines where long spans require high tensile strength and low sag.

Application details →

Distribution feeders

Primary distribution lines on wood or concrete poles, typically 11–33 kV.

Application details →

Crossings & long spans

River, valley and highway crossings where mechanical load dominates conductor selection.

Application details →
Engineering support

Need help selecting ACSR stranding?

Send the line voltage, span schedule and climate zone. We will recommend the stranding and prepare a quotation.